CWC Syllabus 2026: Central Warehousing Corporation (CWC), a Navratna Central Public Sector Enterprise under the Ministry of Consumer Affairs, Food and Public Distribution, Government of India, has released the detailed examination pattern and indicative syllabus for Assistant Manager. The recruitment examination covers eight post codes, including Assistant Manager (General), Assistant Manager (Technical), Assistant Manager (Finance), Assistant Manager (Engineering – Civil, Electrical and Mechanical), Junior Executive (General), and Junior Executive (Technical). According to the official notification dated 17 October 2026, the online examination will consist of 200 objective questions and 2 descriptive questions, carrying a total of 230 marks. Candidates will receive 180 minutes to complete the examination, with separately timed sections.
There will be a penalty of one-fourth of the marks assigned to an objective question for each incorrect answer. The selection process includes an online examination and document verification, while an additional interview is required for Assistant Manager positions. This article explains the official CWC Syllabus 2026, post-wise examination patterns, subject knowledge topics, negative marking, qualifying marks, cut-off rules, score normalization, interview weightage and selection process.
Table of ContentsQuickly navigate to the information you need
CWC Syllabus 2026 Overview
| Particulars | Details |
|---|---|
| Organisation | Central Warehousing Corporation |
| Short Name | CWC |
| Advertisement No. | CWC/I-Manpower/DR/Rectt/2026/01 |
| Notification Date | 17 October 2026 |
| Examination | CWC Recruitment Examination 2026 |
| Posts | Assistant Manager and Junior Executive |
| Total Vacancies | 327 |
| Examination Mode | Online |
| Objective Questions | 200 |
| Descriptive Questions | 2 |
| Total Questions | 202 |
| Maximum Marks | 230 |
| Total Duration | 180 Minutes |
| Sectional Timing | Yes |
| Negative Marking | 25% of Assigned Marks for Each Incorrect Objective Answer |
| Descriptive Test | Language & Comprehension Abilities |
| Selection Process | Online Test, Document Verification and Interview Where Applicable |
| Examination Date | To Be Announced |
| Official Website | https://www.cewacor.nic.in/ |
The examination pattern is different for Assistant Manager (General), Assistant Manager (Technical/Finance/Engineering), Junior Executive (General), and Junior Executive (Technical).
CWC Exam Date 2026
The official notification provides a tentative recruitment schedule.
| Event | Date |
|---|---|
| Notification Release | 17 October 2026 |
| Online Application Start | 17 October 2026 |
| Online Application Last Date | 15 November 2026 |
| Online Fee Payment Deadline | 15 November 2026 |
| Examination Date | To Be Announced |
| Admit Card | Around 21 Days Before Exam |
| Document Verification | To Be Announced |
| Assistant Manager Interview | To Be Announced |
The examination date has not been announced in the supplied detailed advertisement.
Candidates should follow the official CWC website for updated schedules.
CWC Exam Pattern 2026 – Important Features
The examination has the following characteristics:
- The examination will be conducted online.
- Every advertised post has 200 objective questions.
- Every post also has 2 descriptive English questions.
- Objective questions carry 200 marks.
- The descriptive section carries 30 marks.
- The total examination carries 230 marks.
- The total examination duration is 180 minutes.
- Each section is separately timed.
- Incorrect objective answers attract negative marking.
- There is no negative marking for unanswered questions.
- The examination includes prescribed minimum qualifying requirements.
- The online test scores may be normalized if examinations are conducted in multiple sessions.
CWC Assistant Manager (General) Exam Pattern 2026
Post Code: 01
| Subject | Questions | Marks | Duration |
|---|---|---|---|
| Reasoning & Computer Aptitude | 60 | 60 | 50 Minutes |
| English Language | 40 | 40 | 25 Minutes |
| Data Analysis & Interpretation and Quantitative Aptitude | 60 | 60 | 50 Minutes |
| General Awareness | 40 | 40 | 25 Minutes |
| Language & Comprehension Abilities – Descriptive Test | 2 | 30 | 30 Minutes |
| Total | 202 | 230 | 180 Minutes |
Examination Medium
| Section | Medium |
|---|---|
| Reasoning & Computer Aptitude | Hindi and English |
| English Language | English |
| Quantitative Aptitude & Data Interpretation | Hindi and English |
| General Awareness | Hindi and English |
| Descriptive Test | English |
The Assistant Manager (General) examination does not have a separate Professional/Subject Knowledge section.
CWC Assistant Manager (Technical, Finance and Engineering) Exam Pattern 2026
This pattern applies to:
- Assistant Manager (Technical) – Code 02
- Assistant Manager (Finance) – Code 03
- Assistant Manager (Civil Engineering) – Code 04
- Assistant Manager (Electrical Engineering) – Code 05
- Assistant Manager (Mechanical Engineering) – Code 06
| Subject | Questions | Marks | Duration |
|---|---|---|---|
| Professional/Subject Knowledge | 60 | 60 | 55 Minutes |
| General Awareness | 40 | 40 | 20 Minutes |
| English Language | 40 | 40 | 25 Minutes |
| Reasoning & Computer Aptitude | 30 | 30 | 25 Minutes |
| Data Analysis & Interpretation and Quantitative Aptitude | 30 | 30 | 25 Minutes |
| Language & Comprehension – Descriptive Test | 2 | 30 | 30 Minutes |
| Total | 202 | 230 | 180 Minutes |
The Professional Knowledge section will cover the subjects associated with the respective post.
Except for English Language and the descriptive English test, the specified sections will be available in Hindi and English.
CWC Junior Executive (General) Exam Pattern 2026
Post Code: 07
| Subject | Questions | Marks | Duration |
|---|---|---|---|
| Reasoning & Computer Aptitude | 50 | 50 | 45 Minutes |
| Data Analysis & Interpretation and Quantitative Aptitude | 50 | 50 | 45 Minutes |
| General Awareness | 50 | 50 | 25 Minutes |
| English Language | 50 | 50 | 35 Minutes |
| Language & Comprehension – Descriptive Test | 2 | 30 | 30 Minutes |
| Total | 202 | 230 | 180 Minutes |
Examination Medium
- Reasoning & Computer Aptitude: English
- Quantitative Aptitude & Data Interpretation: Hindi and English
- General Awareness: Hindi and English
- English Language: English
- Descriptive Test: English
There is no separate Subject Knowledge section for Junior Executive (General).
Also Read: RGCB Recruitment 2026: Apply Online for Technical Officer and Technical Assistant Posts
CWC Junior Executive (Technical) Exam Pattern 2026
Post Code: 08
| Subject | Questions | Marks | Duration |
|---|---|---|---|
| Subject Knowledge | 65 | 65 | 55 Minutes |
| Reasoning & Computer Aptitude | 40 | 40 | 25 Minutes |
| Data Analysis & Interpretation and Quantitative Aptitude | 40 | 40 | 30 Minutes |
| General Awareness | 20 | 20 | 15 Minutes |
| English Language | 35 | 35 | 25 Minutes |
| Language & Comprehension – Descriptive Test | 2 | 30 | 30 Minutes |
| Total | 202 | 230 | 180 Minutes |
Examination Medium
The Reasoning & Computer Aptitude section will be in English.
Subject Knowledge, Quantitative Aptitude and General Awareness will be available in Hindi and English.
The English Language and descriptive sections will be conducted in English.
CWC Negative Marking 2026
The official advertisement confirms negative marking for objective-type questions.
Marking Rules:
| Response | Marks |
|---|---|
| Correct Answer to a One-Mark Question | +1 |
| Incorrect Answer to a One-Mark Question | -0.25 |
| Unanswered Question | 0 |
For each incorrectly answered objective question, one-fourth of the marks assigned to that question will be deducted.
Negative Marking Example
Suppose a candidate attempts 100 one-mark objective questions and answers:
- 80 correctly
- 20 incorrectly
The score will be:
Correct Answer Marks = 80
Negative Marks = 20 × 0.25 = 5
Final Corrected Objective Score = 75 Marks
Unanswered questions do not attract a penalty.
The descriptive test is evaluated separately; the advertisement does not prescribe the objective negative-marking formula for descriptive answers.
CWC Sectional Cut-off and Qualifying Marks 2026
The official notification requires candidates to obtain the prescribed minimum score in individual sections and an overall minimum score.
Professional/Subject Knowledge Qualifying Marks
Applicable to Assistant Manager (Technical, Finance and Engineering) and Junior Executive (Technical).
| Category | Minimum Qualifying Percentage |
|---|---|
| UR | 40% |
| OBC | 35% |
| EWS | 35% |
| SC | 35% |
| ST | 35% |
| PwBD | 35% |
| Ex-Servicemen | 35% |
For the 60-mark Professional Knowledge section, 40% is equivalent to 24 marks and 35% to 21 marks.
For the 65-mark Subject Knowledge section, the corresponding values are 26 marks and 22.75 marks.
Also Read: JKSSB JE Recruitment 2026: Apply Online for 458 Junior Engineer (Civil) Posts
Descriptive Test Qualifying Marks
The descriptive test is compulsory for all advertised posts.
| Category | Minimum Qualifying Percentage |
|---|---|
| UR | 40% |
| OBC/EWS/SC/ST/PwBD/Ex-Servicemen | 35% |
For the 30-mark descriptive test:
- 40% = 12 marks
- 35% = 10.5 marks
Important Cut-off Rule
The Corporation may relax or enhance minimum qualifying requirements according to candidate performance and recruitment needs, as permitted by the advertisement.
The final shortlisting cut-off will depend on the number of vacancies, examination performance and other applicable selection conditions.
CWC Syllabus 2026 – Official Professional Knowledge
The detailed advertisement provides a broad indicative syllabus for the Professional/Subject Knowledge sections.
Important: CWC states that the indicative syllabus may change slightly in the examination.
1. CWC Assistant Manager (Technical) Syllabus 2026
Post Code: 02
A. Agricultural Process Engineering & Storage Systems
- Engineering properties of agricultural produce
- Drying and moisture management
- Cleaning, grading and material handling
- Processing of cereals, pulses and oilseeds
- Storage systems including godowns and silos
- Controlled and modified atmosphere storage
- Packaging
B. Food Engineering & Preservation
- Basic heat and mass transfer
- Food preservation through cooling and freezing
- Refrigeration and cold storage
- Pasteurization and sterilization
- Water activity and food storage principles
C. Food Chemistry & Nutrition
- Composition and properties of carbohydrates
- Proteins and lipids
- Enzymes
- Chemical changes during storage and processing
- Biochemical changes during storage and processing
- Food quality parameters
- Food deterioration
D. Food Microbiology & Pest Control
- Microorganisms associated with food grains
- Microbial growth and food spoilage
- Storage fungi and mycotoxins
- Food-borne pathogens
- Fumigation principles
- Stored-grain pests
- Rodent control
- Integrated Pest Management (IPM)
- Pesticide application, dosage and safety precautions
E. General Biology & Biotechnology
- Biomolecules
- Enzymes
- Microorganisms
- Microbial growth and nutrition
- Basic genetics
- Molecular biology
- Applications of biotechnology in food preservation
- Grain quality
- Pest management
- Storage
F. Grain Storage, Quality Control & Chemical Preservation
- Quality inspection and grading of food grains
- Sampling techniques
- Moisture determination
- Grain standards
- Storage losses
- Scientific storage practices
- Pre-monsoon and post-monsoon prophylactic treatment
- Fumigation practices
- Fumigation chemicals and dosage
- Quality control measures in warehouses
2. CWC Assistant Manager (Finance) Syllabus 2026
Post Code: 03
A. Financial Accounting
- Indian Accounting Standards (Ind AS) notified under the Companies Act, 2013
- Accounting process and Generally Accepted Accounting Principles (GAAP)
- Accounting of income, expenses, assets and liabilities
- Bank reconciliation statements
- Rectification entries
- Disclosure notes in annual accounts
- Cash flow statements
- Preparation of company final accounts
- Banking transactions and accounting
- Payroll accounting
- Nature and functions of cost accounting
- Cost control and cost reduction methods
B. Taxation
- Concepts and provisions of the Income Tax Act, 2025, as named in the recruitment notification
- Salient features and provisions of the Goods and Services Tax Act, 2017
C. Auditing
- Concept of auditing
- Company audit
- Audit reports
- Audit certificates
- Ledger scrutiny
- Internal control
3. CWC Assistant Manager (Civil Engineering) Syllabus 2026
Post Code: 04
A. Structural Engineering
- Engineering Mechanics
- Strength of Materials
- Structural Analysis
- Engineering Materials other than concrete and steel
- Concrete Structures, Design and IS Codes
- Steel Structures, Design and IS Codes
B. Geotechnical Engineering & Geomatics
- Soil Mechanics
- Foundation Engineering
- Soil Improvement Techniques
C. Water Resources Engineering
- Fluid Mechanics
- Hydraulics
- Hydrology
- Irrigation
D. Environmental Engineering
- Water and Wastewater
- Air Pollution
- Municipal Solid Waste
- Noise Pollution
E. Transportation Engineering
- Transportation Infrastructure
- Highway Pavements
- Traffic Engineering
F. Surveying
- Principles of Surveying
- Maps
- Distance and Angle Measurement
- Traversing and Triangulation Survey
- Horizontal and Vertical Curves
- Basics of GIS and GPS
G. Project Management & Planning
Project Management and Planning are specified in the official syllabus.
H. Concrete Technology
- Concrete Technology
- Prestressed Concrete
4. CWC Assistant Manager (Electrical Engineering) Syllabus 2026
Post Code: 05
A. Electric Circuits
- Network Graph
- Kirchhoff’s Current Law (KCL)
- Kirchhoff’s Voltage Law (KVL)
- Node and Mesh Analysis
- Transient Response of DC and AC Networks
- Sinusoidal Steady-State Analysis
- Resonance
- Passive Filters
- Ideal Current and Voltage Sources
- Thevenin’s Theorem
- Norton’s Theorem
- Superposition Theorem
- Maximum Power Transfer Theorem
- Two-Port Networks
- Three-Phase Circuits
- Power and Power Factor in AC Circuits
B. Electromagnetic Fields
- Coulomb’s Law
- Electric Field Intensity
- Electric Flux Density
- Gauss’s Law
- Divergence
- Electric Field and Potential due to Charge Distributions
- Dielectric Medium
- Capacitance
- Biot-Savart’s Law
- Ampere’s Law
- Curl
- Faraday’s Law
- Lorentz Force
- Inductance
- Magnetomotive Force
- Reluctance
- Magnetic Circuits
- Self and Mutual Inductance
C. Signals and Systems
- Continuous-Time and Discrete-Time Signals
- Shifting and Scaling Operations
- Linear Time-Invariant Systems
- Causal Systems
- Fourier Series
- Sampling Theorem
- Fourier Transform
- Laplace Transform
- Z-Transform
D. Electrical Machines
- Single-Phase Transformers and Equivalent Circuits
- Transformer Phasor Diagrams
- Open-Circuit and Short-Circuit Tests
- Transformer Regulation and Efficiency
- Three-Phase Transformers
- Transformer Connections and Parallel Operation
- Autotransformers
- Electromechanical Energy Conversion
- DC Machines
- DC Motor Starting and Speed Control
- Three-Phase Induction Motors
- Single-Phase Induction Motors
- Synchronous Machines
- Losses and Efficiency Calculations
E. Power Systems
- Power Generation Concepts
- AC and DC Transmission
- Transmission Lines and Cables
- Series and Shunt Compensation
- Electric Field Distribution and Insulators
- Distribution Systems
- Per-Unit Quantities
- Bus Admittance Matrix
- Gauss-Seidel Load Flow Method
- Newton-Raphson Load Flow Method
- Voltage and Frequency Control
- Power Factor Correction
- Symmetrical Components
- Fault Analysis
- Overcurrent, Differential and Distance Protection
- Circuit Breakers
- System Stability
- Equal Area Criterion
F. Control Systems
- Mathematical Modelling
- Feedback Principle
- Transfer Functions
- Block Diagrams
- Signal Flow Graphs
- Transient and Steady-State Analysis
- Routh-Hurwitz Criterion
- Nyquist Criterion
- Bode Plots
- Root Locus
- Stability Analysis
- Lag, Lead and Lead-Lag Compensators
- P, PI and PID Controllers
- State-Space Models
- State Transition Matrix
G. Electrical and Electronic Measurements
- Bridges and Potentiometers
- Voltage and Current Measurement
- Power and Energy Measurement
- Power Factor Measurement
- Instrument Transformers
- Digital Voltmeters and Multimeters
- Phase, Time and Frequency Measurement
- Oscilloscopes
- Error Analysis
H. Analog and Digital Electronics
- Diodes
- BJT and MOSFET
- Clipping and Clamping Circuits
- Rectifiers
- Amplifiers and Frequency Response
- Oscillators
- Feedback Amplifiers
- Operational Amplifiers
- Active Filters
- Voltage-Controlled Oscillators
- Timers
- Combinational and Sequential Logic
- Multiplexers and Demultiplexers
- Schmitt Triggers
- Sample and Hold Circuits
- A/D and D/A Converters
- 8085 Microprocessor Architecture, Programming and Interfacing
I. Power Electronics
- Power Semiconductor Devices
- Diode, Thyristor, TRIAC, GTO, MOSFET and IGBT
- Buck, Boost and Buck-Boost Converters
- Single-Phase and Three-Phase Rectifiers
- Line-Commutated Thyristor Converters
- Bidirectional AC-DC Voltage Source Converters
- Line Current Harmonics
- Power Factor and Distortion Factor
- Single-Phase and Three-Phase Inverters
- Sinusoidal Pulse Width Modulation
5. CWC Assistant Manager (Mechanical Engineering) Syllabus 2026
Post Code: 06
A. Applied Mechanics & Machine Design
- Engineering Mechanics
- Strength of Materials
- Stress and Strain
- Beams, Shafts and Columns
- Theory of Machines
- Gears and Bearings
- Brakes and Clutches
- Belts and Pulleys
- Machine Design Fundamentals
- Basic Vibration Concepts
B. Thermal Engineering & Fluid Mechanics
- Fluid Properties
- Bernoulli’s Theorem
- Flow Through Pipes
- Pumps and Compressors
- Thermodynamics
- Internal Combustion Engines
- Refrigeration and Air Conditioning
- Heat Transfer
- Psychrometry
- Air Compressors and Compressed Air Systems
C. Manufacturing Technology & Engineering Materials
- Engineering Materials
- Heat Treatment
- Casting
- Welding
- Brazing and Fabrication
- Machining Processes
- CNC
- Metrology
- Limits, Fits and Tolerances
- Maintenance Tools
- Inspection Techniques
D. Production Engineering
- Metal Cutting
- Tool Geometry
- Tool Wear
- Jigs and Fixtures
- Abrasive Machining
- Non-Traditional Machining
- Computer-Integrated Manufacturing
- CAD/CAM
- Additive Manufacturing
- Production Planning and Control
E. Industrial Engineering
- Inventory Control
- Forecasting
- Scheduling
- Materials Requirement Planning
- Lean Manufacturing
- Operations Research
- Linear Programming
- Transportation Models
- Assignment Models
- Network Models
- Queuing Theory
- PERT and CPM
6. CWC Junior Executive (Technical) Syllabus 2026
Post Code: 08
A. Basic Agriculture
- Crop Production
- Animal Husbandry
- Plant Protection
- Agricultural Extension
- Horticulture
- Agricultural Economics
B. Botany
- Cell Biology
- Tissues
- Organs and Organ Systems
- Genetics
- Plant Classification
- Plant Diversity
- Ecology
- Photosynthesis
- Respiration
- Circulation
- Movement and Other Life Processes
C. Zoology
- Insect Morphology
- Insect Physiology
- Insect Taxonomy
- Organ Systems
- Heredity and Variation
- Microorganisms
- Storage and Public Health
- Insects and Rodents
- Insecticides
- Toxicology
D. Chemistry
- Chemical Bonding
- Organic Chemistry
- Inorganic Chemistry
- Biochemistry
E. Physics
- Motion
- Force and Energy
- Electricity
- Magnetism
- Light and Sound
- Thermodynamics
- Measurement
CWC General Syllabus 2026 – Reasoning, Maths, English and GK
The official notification identifies the general examination sections but does not provide an exhaustive chapter-wise topic list for these sections.
The following topics are recommended preparation areas and must not be confused with the officially prescribed Professional Knowledge syllabus.
Reasoning & Computer Aptitude – Suggested Topics
- Logical Reasoning
- Puzzles
- Seating Arrangements
- Syllogism
- Inequalities
- Coding-Decoding
- Blood Relations
- Direction Sense
- Series and Patterns
- Computer Fundamentals
- MS Office
- Internet Basics
- Computer Networking Fundamentals
Quantitative Aptitude & Data Interpretation – Suggested Topics
- Number System
- Simplification
- Percentage
- Ratio and Proportion
- Average
- Profit and Loss
- Simple Interest
- Compound Interest
- Time and Work
- Speed, Time and Distance
- Mixture and Alligation
- Data Interpretation
- Tables
- Bar Graphs
- Line Graphs
- Pie Charts
English Language – Suggested Topics
- Reading Comprehension
- Error Detection
- Sentence Improvement
- Fill in the Blanks
- Cloze Test
- Vocabulary
- Synonyms and Antonyms
- Para Jumbles
- Grammar and Usage
General Awareness – Suggested Topics
- Current Affairs
- Indian History
- Geography
- Indian Polity
- Indian Economy
- General Science
- Government Schemes
- Banking and Financial Awareness
- National and International Events
These topics are preparation guidance only. CWC has not assigned an official chapter-wise question distribution to them.
CWC Descriptive English Test 2026
Every advertised post includes a descriptive test titled Language & Comprehension Abilities – Descriptive Test.
| Particulars | Details |
|---|---|
| Number of Questions | 2 |
| Maximum Marks | 30 |
| Duration | 30 Minutes |
| Medium | English |
| Qualifying Percentage – UR | 40% |
| Qualifying Percentage – Other Listed Categories | 35% |
The notification does not specify whether the two questions will be essays, letters, precis-writing or another particular writing format.
Candidates should follow the examination information handout issued by CWC for the exact descriptive question types and instructions.
CWC Exam Score Normalization 2026
The official advertisement explains how the Corporation will calculate online examination scores.
Step 1: Calculate Corrected Scores
Marks from correctly answered objective questions are calculated after deducting the prescribed penalty for wrong answers.
Step 2: Equate Scores
If different examination sessions use papers with minor differences in difficulty, the scores may be equated.
Step 3: Apply Normalization
The notification specifies normalization through the equi-percentile method where applicable.
Step 4: Calculate Sectional and Total Scores
The examination scores are calculated and reported up to two decimal places.
Step 5: Apply Cut-offs
Cut-offs are applied in two stages:
- Individual test or sectional scores.
- Total examination score.
Candidates must satisfy applicable qualifying conditions and achieve sufficient merit to be shortlisted.
CWC Interview Process 2026
The interview applies to Assistant Manager posts under Post Codes 01 to 06.
Interview Marks
| Particulars | Details |
|---|---|
| Maximum Interview Marks | 30 |
| Online Examination Weightage | 85% |
| Interview Weightage | 15% |
| Interview Location | Delhi |
| Shortlisting Ratio | 1:5 |
Interview Qualifying Marks
| Category | Minimum Percentage |
|---|---|
| UR | 50% |
| EWS | 50% |
| OBC | 45% |
| SC | 40% |
| ST | 40% |
| PwBD | 40% |
| Ex-Servicemen | 40% |
The minimum corresponding marks out of 30 are:
- UR/EWS: 15 marks
- OBC: 13.5 marks
- SC/ST/PwBD/Ex-Servicemen: 12 marks
Final Merit for Assistant Manager
Final selection is based on the weighted combination of online examination and interview performance.
Online Examination : Interview = 85 : 15
Candidates must also complete document verification successfully.
CWC Junior Executive Selection Process 2026
Junior Executive (General) and Junior Executive (Technical) candidates will not undergo an interview under the advertised selection process.
The stages are:
Stage 1: Online Examination
Stage 2: Shortlisting according to examination merit
Stage 3: Document Verification
Stage 4: Final Selection according to the applicable rules
The maximum shortlisting ratio for Junior Executive document verification is 1:3.
Document verification for these posts will be conducted in person at the CWC Corporate Office in Delhi, according to the advertisement.
CWC Exam Centres and Admit Card 2026
The examination will be conducted at designated online examination centres.
The exact examination centre, date, session and reporting time will be specified in the candidate’s call letter.
Admit Card
Candidates must download their call letters from the official CWC website.
The notification tentatively schedules the examination call letter around 21 days before the test.
Candidates may receive an email or SMS notification regarding call letter availability.
Documents Required at Examination Centre
Candidates must bring:
- Valid examination call letter.
- Original photo identity proof bearing the required matching name.
- Photocopy of the same photo identity proof.
- Any additional documents required in the call letter.
Candidates reporting after the specified reporting time will not be permitted to appear for the examination.
Examination Centre Rules
The Corporation reserves the right to allot a different examination centre or modify examination arrangements.
Candidates cannot demand a change of venue, date or session.
Although the actual online examination duration is three hours, candidates may be required to remain at the examination venue for approximately four hours or longer to complete administrative formalities.
CWC Syllabus 2026 Preparation Strategy
The following suggestions are preparation guidance rather than official instructions.
For Assistant Manager (General)
Candidates should allocate regular preparation time to:
- Reasoning & Computer Aptitude
- Quantitative Aptitude and Data Interpretation
- English Language
- General Awareness
- Descriptive English
Quantitative Aptitude and Reasoning each carry 60 marks, making them substantial components of the objective examination.
For Assistant Manager (Technical/Finance/Engineering)
Candidates should focus on their relevant Professional Knowledge subjects while continuing practice in English, Reasoning, Quantitative Aptitude and General Awareness.
The Professional Knowledge section carries 60 marks and has a prescribed minimum qualifying percentage.
For Junior Executive (General)
Candidates should prepare the four objective sections systematically.
Each objective section contains 50 questions carrying 50 marks.
The descriptive section adds another 30 marks.
For Junior Executive (Technical)
Candidates should prioritise Subject Knowledge alongside the general sections.
The Subject Knowledge component contains 65 questions carrying 65 marks.
The prescribed minimum qualifying requirement also applies to this section.
Descriptive English Preparation
Candidates should practise clear written communication and comprehension under timed conditions.
However, they should avoid assuming an exact essay or letter-writing pattern until the official information handout specifies the question formats.
CWC Syllabus 2026 Important Links
| Particulars | Details |
|---|---|
| Official Website | https://www.cewacor.nic.in/ |
| Recruitment Advertisement | CWC/I-Manpower/DR/Rectt/2026/01 |
| Notification Date | 17 October 2026 |
| Official Exam Pattern | Detailed Advertisement, Pages 12–13 |
| Official Professional Syllabus | Detailed Advertisement, Pages 13–17 |
| Negative Marking and Cut-off Rules | Detailed Advertisement, Online Examination Section |
| Exam Date | To Be Announced |
| Admit Card | Official CWC Website |
Candidates should refer to the original notification and subsequent official information handout for the final examination instructions.
CWC Syllabus 2026 FAQs
Q1. What is the CWC Syllabus 2026?
The CWC examination includes Reasoning & Computer Aptitude, Quantitative Aptitude and Data Interpretation, English Language, General Awareness and a descriptive English test. Specialised posts also have Professional/Subject Knowledge.
Q2. How many questions are in the CWC examination?
There are 200 objective questions and 2 descriptive questions, making a total of 202 questions.
Q3. What are the total marks?
The online examination carries 230 marks.
Q4. What is the exam duration?
The total examination duration is 180 minutes.
Q5. Is there negative marking?
Yes. One-fourth of the marks assigned to each incorrectly answered objective question will be deducted.
Q6. Is there negative marking for unanswered questions?
No. Unanswered objective questions do not attract a penalty.
Q7. Is there sectional timing?
Yes. Every examination section is separately timed.
Q8. Is the CWC exam conducted online?
Yes. The recruitment examination will be conducted online.
Q9. Is the CWC exam bilingual?
Several objective sections will be available in Hindi and English. However, the English Language and descriptive sections are in English, and the Junior Executive Reasoning & Computer Aptitude sections are specified in English.
Q10. Does Assistant Manager (General) have a Professional Knowledge section?
No. The Assistant Manager (General) examination does not include a separate Professional Knowledge section.
Q11. Is Professional Knowledge included for Assistant Manager (Technical)?
Yes. The Professional Knowledge section carries 60 marks.
Q12. How many Subject Knowledge questions are included for Junior Executive (Technical)?
There are 65 Subject Knowledge questions carrying 65 marks.
Q13. What is the descriptive test duration?
The descriptive test duration is 30 minutes.
Q14. Is descriptive English compulsory for every post?
Yes. All advertised posts have a 30-mark descriptive English section.
Q15. What are the descriptive test qualifying marks?
The minimum qualifying percentage is 40% for UR candidates and 35% for the other specified categories.
Q16. What are the Professional Knowledge qualifying marks?
The minimum qualifying percentage is 40% for UR candidates and 35% for the other specified categories.
Q17. Is there an interview for Assistant Manager?
Yes. Assistant Manager posts require an interview after the online examination and shortlisting.
Q18. Is there an interview for Junior Executive?
No. The advertised Junior Executive selection process does not include an interview.
Q19. What is the interview weightage?
For Assistant Manager posts, the online examination carries 85% weightage and the interview carries 15%.
Q20. What is the maximum interview score?
The interview carries 30 marks.
Q21. What is the shortlisting ratio for Assistant Manager?
The maximum shortlisting ratio is 1:5.
Q22. What is the shortlisting ratio for Junior Executive?
The maximum shortlisting ratio is 1:3.
Q23. Will CWC normalize examination scores?
Yes, the notification provides for equating and equi-percentile normalization where different examination sessions are conducted.
Q24. Has the CWC examination date been announced?
The supplied detailed notification does not announce the examination date.
Q25. Where can candidates download the official CWC syllabus?
Candidates can refer to the detailed recruitment advertisement available through the official Central Warehousing Corporation website.
Final Words
The CWC Syllabus 2026 covers a three-hour online examination consisting of 200 objective questions and two descriptive questions, carrying a total of 230 marks.
The examination pattern differs across the Assistant Manager and Junior Executive posts, particularly in the number of questions allotted to Professional Knowledge, Reasoning, Quantitative Aptitude, English and General Awareness.
Candidates applying for specialised positions should follow the Professional/Subject Knowledge syllabus published in the official advertisement. They should also prepare for the prescribed sectional qualifying marks, descriptive English test and negative-marking system.
Assistant Manager candidates must additionally prepare for the interview stage, while Junior Executive selection will proceed through online examination and document verification.
Candidates should check the official CWC website for the examination date, admit card, information handout and any subsequent changes to the examination structure.
Official Source: Central Warehousing Corporation, Advertisement No. CWC/I-Manpower/DR/Rectt/2026/01, dated 17 October 2026, Detailed Advertisement, 52 pages.
