Jadavpur University Winter Internship 2026: Jadavpur University, Kolkata, has announced a Short-Term Certified Winter Internship Programme on Microelectronics Technology and VLSI Design through its IC Design & Fabrication Centre (IC Centre of Excellence), Department of Electronics & Telecommunication Engineering. The six-week training programme is designed for students interested in semiconductor technology, VLSI design, microelectronics, FPGA-based digital circuits, analog circuits and sensor fabrication. It will provide theoretical instruction along with hands-on laboratory experience.
Table of ContentsQuickly navigate to the information you need

According to the official advertisement, the programme is scheduled to commence on 29 December 2026. Classes will be conducted from 11:00 AM to 5:00 PM, Monday to Saturday.
Students pursuing B.E./B.Tech courses from the second year onwards, as well as eligible M.Sc. Electronics Science students, can apply according to the advertised eligibility conditions.
Interested candidates can obtain the application form from the IC Centre or download it through the university website.
Jadavpur University Winter Internship 2026: Overview
| Particulars | Details |
|---|---|
| University | Jadavpur University |
| Training Centre | IC Design & Fabrication Centre |
| Centre Status | IC Centre of Excellence |
| Department | Electronics & Telecommunication Engineering |
| Programme Name | Winter Internship Programme |
| Course | Microelectronics Technology and VLSI Design |
| Programme Duration | 6 Weeks |
| Starting Date | 29 December 2026 |
| Class Timing | 11:00 AM to 5:00 PM |
| Class Days | Monday to Saturday |
| Course Mode | Training with Hands-on Laboratory Experience |
| Course Fee | ₹10,620 (including GST) |
| JU Student Fee | ₹8,496 (including GST) |
| Location | Jadavpur University, Kolkata – 700032 |
| Application Mode | Application Form Submission |
| Official Website | https://www.jaduniv.edu.in/ |
Jadavpur University Winter Internship 2026 NNotification PDF Download
Jadavpur University Winter Internship Important Dates and Schedule
Candidates should note the programme schedule mentioned in the advertisement.
| Event | Schedule |
|---|---|
| Programme Starting Date | 29 December 2026 |
| Programme Duration | 6 Weeks |
| Daily Class Timing | 11:00 AM – 5:00 PM |
| Class Days | Monday to Saturday |
| Application Form Submission | Monday to Friday, 11:00 AM – 5:00 PM |
The advertisement does not specify a separate final application deadline. Candidates should contact the IC Centre to confirm whether seats are still available and the last date for submitting the application.
About the Winter Internship Programme
The Winter Internship Programme focuses on Microelectronics Technology and VLSI Design. It is offered by the IC Design & Fabrication Centre under the Department of Electronics & Telecommunication Engineering at Jadavpur University.
The programme combines classroom-based theoretical learning with practical laboratory exposure. Students will get an opportunity to learn about semiconductor device fabrication, digital circuit design, analog MOS circuits, FPGA prototyping, Verilog programming and sensor technologies.
The training is particularly relevant for students who want to develop technical knowledge in semiconductor devices, integrated circuits and electronic system design.
Eligibility Criteria
According to the advertisement, candidates should have completed at least the second year of a B.E./B.Tech programme or be studying in a higher year.
The eligible academic backgrounds include:
- Electronics and Communication Engineering (ECE)
- Electrical and Electronics Engineering (EEE)
- Electrical Engineering
- Computer Science and Engineering (CSE)
- Information Technology (IT)
- M.Sc. Electronics Science
- Equivalent qualifications
Candidates from the above-mentioned disciplines who satisfy the minimum academic-year requirement can contact the IC Centre for application details.
Course Duration and Class Timing
The Winter Internship Programme will run for six weeks.
| Particulars | Details |
|---|---|
| Duration | 6 Weeks |
| Commencement | 29 December 2026 |
| Daily Schedule | 11:00 AM to 5:00 PM |
| Weekly Schedule | Monday to Saturday |
The advertisement does not mention the exact concluding date. Candidates should confirm the final schedule with the training centre.
Also Read: Hyderabad District Recruitment 2026: Apply for Junior Assistant & Class-IV Posts
Course Fee and Discount Details
The advertisement specifies the following course fees:
| Candidate Category | Course Fee |
|---|---|
| Regular Candidates | ₹9,000 + 18% GST |
| Total Fee Including GST | ₹10,620 |
| Jadavpur University Students | ₹8,496 (including GST) |
Jadavpur University students are eligible for a 20% discount as mentioned in the advertisement.
Jadavpur University Winter Internship Payment Instructions
Candidates must pay the course fee through a Demand Draft.
The Demand Draft should be drawn in favour of:
“REGISTRAR, JADAVPUR UNIVERSITY”
It should be payable at Kolkata and issued by a Nationalized Bank.
Important Fee Conditions
- The course fee cannot be refunded once deposited.
- Hostel accommodation will not be provided.
- Institutions having a Memorandum of Agreement (MoA) with the university may receive a discount according to the applicable MoA.
Candidates should confirm payment-related instructions with the IC Centre before preparing the Demand Draft.
Topics Covered in the VLSI and Microelectronics Training
The programme advertisement lists six major technical areas.
1. Fabrication and Characterization of Semiconductor Devices
Students will learn about semiconductor device characterization and the basic processes involved in microelectronics fabrication.
Topics include:
- Characterization of semiconductor devices
- Mask fabrication
- Cleaning and oxidation
- Diffusion and lithography
- Photolithography and metallization
- Characterization of fabricated devices
2. FPGA-Based Prototyping of Digital Circuits
This section introduces digital circuit design and FPGA-based implementation.
Topics include:
- Overview of CMOS logic gates
- Architectural design of digital circuits
- Logic synthesis
- FPGA-based prototyping
3. Nano-Sensors: Technology and Application
Students will be introduced to nanomaterial-based sensing technologies and their applications.
Topics include:
- Smart nanomaterial for sensing applications
- Nano-sensor fabrication technologies
- Graphene synthesis
- Sensors with IoT
4. Analog MOS Circuit – Theoretical Class and EDA Design
This module focuses on analog MOS circuit fundamentals and design.
Topics include:
- Single-stage MOS amplifier
- Active loads
- Current source and current sink
- Current mirror
- Single-stage CMOS OpAmp
- Circuit design using Cadence EDA-based tools
5. System Verilog and Timing Analysis (EDA Based)
This module introduces hardware description and timing analysis concepts.
Topics include:
- Introduction to System Verilog
- Timing analysis and debugging
- Case study on CPU design
- Design and simulation using EDA tools
6. Basics of Analog Circuit – RC Circuit
This section covers fundamental analog circuit concepts and practical design techniques.
Topics include:
- RC circuit
- Troubleshooting
- Use of EDA tools for schematic design
- Layout design
Hands-on Laboratory Experience
One of the important features highlighted in the advertisement is laboratory-based practical training.
The IC Centre’s laboratory facilities are intended to give participants practical exposure to microelectronics and semiconductor-related equipment.
The advertised training outcomes include:
- Laboratory handling
- Programming using Verilog
- Handling different micro-fabrication techniques
- Fabrication of sensors
- Handling FPGA boards
The advertisement also provides a glimpse of the IC Centre’s laboratory facilities and previous technical outcomes.
Training Outcomes
After completing the programme, participants are expected to gain exposure to several practical and technical areas.
The main learning outcomes listed in the advertisement are:
- Laboratory handling and equipment familiarity.
- Programming using Verilog.
- Understanding different micro-fabrication techniques.
- Practical exposure to sensor fabrication.
- Working with FPGA boards.
These skills can help students build a foundation for further academic learning and projects in microelectronics, semiconductor technology and VLSI design.
How to Apply for Jadavpur University Winter Internship 2026
Candidates interested in joining the programme can obtain the application form through either of the following methods.
Method 1: Collect the Application Form
Candidates can collect the application form directly from the IC Design & Fabrication Centre, Department of Electronics & Telecommunication Engineering, Jadavpur University.
Method 2: Download the Application Form
Candidates can visit the official Jadavpur University website and check the relevant programme or notice section for the application form.
Official website: https://www.jaduniv.edu.in/
Application Submission Steps
- Obtain or download the prescribed application form.
- Fill in the required personal and academic details.
- Attach the required documents and photograph.
- Prepare the Demand Draft for the applicable course fee.
- Submit the completed application form at the IC Centre.
- Confirm the application receipt and further instructions from the centre.
Application Submission Time: Monday to Friday, 11:00 AM to 5:00 PM.
The advertisement states that completed application forms must be received at the IC Centre.
Jadavpur University Winter Internship Documents Required
Candidates should prepare the following documents as mentioned in the advertisement:
- One copy of a passport-size photograph.
- Photocopy of Madhyamik Admit Card or Birth Certificate.
- Photocopy of Higher Secondary (HS) Marksheet.
- Attested or self-attested copies of the relevant marksheets and certificates.
- Demand Draft for the applicable course fee.
Candidates should check with the IC Centre if any additional academic documents are required for their particular course or qualification.
Application Address and Contact Details
Candidates can contact the IC Design & Fabrication Centre for information regarding admission, application forms, fees and programme availability.
Address:
IC Design & Fabrication Centre (IC Centre of Excellence)
Department of Electronics & Telecommunication Engineering
Jadavpur University
Kolkata – 700032, West Bengal, India.
Contact Details:
- Email: [email protected]
- Phone: (033) 2457-2406 / 2414-6217
- Mobile: 9903402142
Candidates are advised to confirm the latest admission instructions and seat availability directly with the centre before making payment.
Jadavpur University Winter Internship Important Links
| Purpose | Official Link |
|---|---|
| Jadavpur University Official Website | https://www.jaduniv.edu.in/ |
| University Website Mentioned in Advertisement | https://jadavpuruniversity.in/ |
| Admission Enquiry Email | [email protected] |
Official Advertisement: The uploaded Winter Training VLSI advertisement is the source used for the programme details in this article. Check the university website or contact the IC Centre for the application form and any updated admission notice.
Also Read: Telangana TOSS SSC, Inter Result 2026 Out at telanganaopenschool.org: Direct Link to Download Here
FAQs- Jadavpur University Winter Internship 2026
Q1. What is the Jadavpur University Winter Internship 2026?
It is a six-week certified winter internship programme on Microelectronics Technology and VLSI Design offered by the IC Design & Fabrication Centre, Jadavpur University.
Q2. When will the programme start?
The programme is scheduled to start on 29 December 2026.
Q3. What is the duration of the internship?
The programme duration is six weeks.
Q4. Who is eligible to apply?
Students who are at least in the second year of B.E./B.Tech in ECE, EEE, Electrical, CSE, IT or equivalent disciplines, as well as eligible M.Sc. Electronics Science students, can apply.
Q5. What is the course fee?
The regular course fee is ₹9,000 plus 18% GST, making the total ₹10,620. Jadavpur University students receive a 20% discount and pay ₹8,496 including GST.
Q6. What are the class timings?
Classes will take place from 11:00 AM to 5:00 PM, Monday to Saturday.
Q7. What topics will be covered?
The programme covers semiconductor device fabrication, FPGA-based digital circuit prototyping, nano-sensors, analog MOS circuits, System Verilog, timing analysis and RC circuits.
Q8. Will students receive practical laboratory training?
Yes. The advertisement highlights hands-on laboratory experience, including Verilog programming, micro-fabrication techniques, sensor fabrication and FPGA board handling.
Q9. Is hostel accommodation available?
No. The advertisement clearly states that hostel accommodation cannot be provided.
Q10. How can candidates apply?
Candidates can collect the application form from the IC Centre or download it through the university website. The completed form must be submitted at the IC Centre during the specified working hours.