Haryana Staff Selection Commission (HSSC) is inviting application from the eligible candidates for 1634 posts of Instructors, Junior Programmer, Computer Operator, Computer Networking and Hardware Technician, Technical Assistant, Store Keeper, Librarian, Group Instructor/ Apprenticeship Supervisor/ Senior Technical Assistant/ Junior apprenticeship and Placement Officer, Group Instructor In-Charge (Women)/ Group Instructor (Women) and Architectural Assistant. Interested and eligible candidates may apply Online only through the official website of the Haryana Staff Selection Commission (HSSC) (See URL below). Advt No.06/2018 and 7/2018. Educational qualification required and other details, in brief, for informational purpose only in interest of job-seeker, are given below —
HARYANA STAFF SELECTION COMMISSION (HSSC) INVITES ONLINE APPLICATION FOR 1634 POSTS OF INSTRUCTORS, JUNIOR PROGRAMMER, COMPUTER OPERATOR, COMPUTER NETWORKING AND HARDWARE TECHNICIAN, TECHNICAL ASSISTANT, STORE KEEPER, LIBRARIAN, GROUP INSTRUCTOR/ APPRENTICESHIP SUPERVISOR/ SENIOR TECHNICAL ASSISTANT/ JUNIOR APPRENTICESHIP AND PLACEMENT OFFICER, GROUP INSTRUCTOR IN-CHARGE (WOMEN)/ GROUP INSTRUCTOR (WOMEN) AND ARCHITECTURAL ASSISTANT. LAST DATE — 18.02.2019
ADVERTISEMENT NO.7/2018
1. WORKSHOP CALCULATION & SCIENCE INSTRUCTOR
No. of Vacancies: 179 Nos.
Educational Qualification: i) Bachelor degree in Engineering/ Technology or its equivalent in Electrical/ Mechanical from recognized Institution/ University with one year practical/ teaching experience.
OR
Diploma in Engineering or its equivalent in Electrical/ Mechanical from Haryana State Board of Technical Education, with two years practical/ teaching experience.
ii) Knowledge of Hindi/ Sanskrit upto Matric standard or higher education.
iii) Preference shall be given to degree/ diploma holder candidate possessing Craft Instructor Training Course in relevant trade/ P.O.T., from NCVT recognized Institute.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
2. COMPUTER INSTRUCTOR
No. of Vacancies: 49 Nos.
Educational Qualification: i) Bachelor degree in Computer Engineering/ Information Technology or its equivalent from recognized Institute/ University, with one year practical/ teaching experience.
OR
‘A’ level certificate from Department of Electronics and Information Technology (DOEACC), Government of India, with two years practical/ teaching experience in the related field.
OR
B’ level certificate from Department of Electronics and Information Technology (DOEACC), Government of India, with one year practical/ teaching experience in the related field.
OR
M.Sc Computer/ M.Sc Computer Application/ M.Sc Information Technology/ M.Sc Software/ MCA after passing B.Sc./ BCA from a recognized University.
OR
Three years Diploma in Computer Application/ Engineering or its equivalent from Haryana State Board of Technical Education with two years practical/ teaching experience.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
3. EMPLOYABILITY SKILL INSTRUCTOR
No. of Vacancies: 93 Nos.
Educational Qualification: i) Full time Bachelor degree of Business Administration (BBA) and Master of Business Administration (MBA) from recognized University.
ii) Hindi/ Sanskrit upto Matric standard or higher education.
iii) Preference shall be given to candidate possessing additional qualification of Bachelor of education degree from recognized University or Principles of teaching course from NCVT recognized Institute.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
4. ENGINEERING DRAWING INSTRUCTOR
No. of Vacancies: 165 Nos.
Educational Qualification: i) Bachelor degree in Engineering/ Technology or its equivalent in Electrical/ Mechanical trade from recognized Institution/ University, with one year practical/ teaching experience.
OR
Diploma in Engineering or its equivalent in Electrical/ Mechanical trade, from Haryana State Board of Technical Education, with two years practical/ teaching experience.
ii) Knowledge of Hindi/ Sanskrit upto Matric standard or higher education.
iii) Preference shall be given to degree/ diploma holder candidate possessing Craft Instructor Training Course in relevant trade/ P.O.T., from NCVT recognized Institute.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
5. APPRENTICESHIP INSTRUCTOR
No. of Vacancies: 31 Nos.
Educational Qualification: i) Bachelor degree in Engineering/ Technology or its equivalent in Mechanical/ Electrical/ Electronics/ Production/ Automobiles from recognized Institution/ University, with one year practical/ teaching experience.
OR
Diploma in Engineering or its equivalent in Mechanical/ Electrical/ Electronics/ Production/ Automobiles from Haryana State Board of Technical Education, with two years practical/ teaching experience.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
iii) Preference shall be given to degree/ diploma holder candidate possessing Craft Instructor Training Course in relevant trade/ P.O.T., from NCVT recognized Institute.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
6. JUNIOR PROGRAMMER
No. of Vacancies: 02 Nos.
Educational Qualification: i) Full time Bachelor degree in Computer Applications or Regular first division Master degree in Computer Application with 1st division from a recognized University and 02 years experience in Software Development in a Govt. Department/ Statutory Board/ Public Sector
undertaking/ Public Limited Company of repute.
OR
Full time Diploma in Computer Science & Engineering/ Computer Engineering/ Information Technology with 1st division from a recognized Institute and 02 years experience in software development in a Govt. department/ Statutory Board/ Public Sector Undertaking/ Public Limited Company of repute.
OR
Full time Bachelor Degree in Computer Engineering/ Computer Science and Technology/ Information Technology with 1st division from recognized University/ Institute.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 year.
Pay Scale: Rs.35400-112400/-
7. COMPUTER OPERATOR
No. of Vacancies: 04 Nos.
Educational Qualification: i) 10+2 or its equivalent from a recognized Institution.
ii) Diploma in Computer Application/ Computer Science/ Computer Engineering or its equivalent from Haryana State Board of Technical Education.
OR
Post Diploma in Computer Application/ Computer Engineering or its equivalent from Haryana State Board of Technical Education.
OR
‘O level’ course from Department of Electronics and Information Technology (DOEACC), Government of India.
iii) Data Punching speed of 8000 key depressions per hour.
iv) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 year.
Pay Scale: Rs.35400-112400/-
8. COMPUTER NETWORKING AND HARDWARE TECHNICIAN
No. of Vacancies: 01 Nos.
Educational Qualification: i) 10+2 with Physics & Chemistry from a recognized Institute.
ii) Three years diploma in Computers/ Electronics Communication or its equivalent from Haryana State Board Technical Education.
iii) Hindi/ Sanskrit upto Matric Standard or higher education.
iv) Preference shall be given to candidate having certificate from CISCO/ DeLink/Intel/3-Com.
Experience: Two years relevant experience.
Age Limit: Minimum 17 years and maximum 42 year.
Pay Scale: Rs.35400-112400/-
9. TECHNICAL ASSISTANT
No. of Vacancies: 02 Nos.
Educational Qualification: i) Bachelor Degree in Mechanical/ Electrical/ Civil/ Electronics/ Information Technology/ Architecture/ Computer from recognized Institution/ University, with one year practical/ teaching experience.
OR
Diploma in Mechanical/ Electrical/ Civil/ Electronics/ Information Technology/ Architecture/ Computer from Haryana State Board of Technical Education, with two years practical/ teaching experience.
ii) Hindi/ Sanskrit upto Matric standard or Higher Education.
iii) Preference shall be given to degree/ diploma holder candidate possessing Craft Instructor Training Course in relevant trade/ P.O.T., from NCVT recognized Institute.
Age Limit: Minimum 17 years and maximum 42 year.
Pay Scale: Rs.35400-112400/-
10. STORE KEEPER
No. of Vacancies: 101 Nos.
Educational Qualification: i) Full time Bachelor degree in Business Administration or Commerce or Bachelor degree in Arts with Math/ Economics subject, passed with minimum 55% marks from any recognized University.
ii) Hindi/ Sanskrit upto Matric standard or Higher Education.
Experience: One years experience.
Age Limit: Minimum 17 years and maximum 42 year.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
11. LIBRARIAN
No. of Vacancies: 35 Nos.
Educational Qualification: i) Bachelor degree in Library Science from a recognized University.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Experience: Two years experience as a Junior Librarian in any reputed Institute.
Age Limit: Minimum 17 years and maximum 42 year.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
12. GROUP INSTRUCTOR/ APPRENTICESHIP SUPERVISOR/ SENIOR TECHNICAL ASSISTANT/ JUNIOR APPRENTICESHIP AND PLACEMENT OFFICER
No. of Vacancies: 101 Nos.
Educational Qualification: i) Bachelor degree in Civil/ Mechanical/ Production/ Architecture/ Computer/ Electrical/ Electronics/ Instrumentation/ Automobile/ Industrial Engineering/ Technology or its equivalent from recognized Institute/ University.
ii) Hindi/ Sanskrit upto Matric Standard or Higher Education.
iii) Preference shall be given to candidates possessing additional qualification of craft instructor training course/ Principals of teaching (P.O.T).
Experience: Two year practical/ teaching experience in the concerned trade.
Age Limit: Minimum 17 years and maximum 42 year.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.4000/-
13. GROUP INSTRUCTOR IN-CHARGE (WOMEN) / GROUP INSTRUCTOR (WOMEN)
No. of Vacancies: 02 Nos.
Educational Qualification: i) Full time Bachelor Degree in Beauty Culture/ Beauty Culture and Hair Dressing from any recognized Institute/ University with 02 years supervisory or practical or teaching experience in the concerned trade.
OR
Full time Diploma in Beauty Culture/ Beauty Culture and Hair Dressing from any recognized Institute/ University with 03 years supervisory or practical or teaching experience in the concerned trade.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 year.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.4000/-
14. GROUP INSTRUCTOR IN-CHARGE (WOMEN) / GROUP INSTRUCTOR (WOMEN) FOR TTC IN FASHION TECHNOLOGY, CUTTING AND SEWING, EMBROIDERY AND NEEDLE WORK, DRESS MAKING
No. of Vacancies: 08 Nos.
Educational Qualification: i) Full time Bachelor Degree in Apparel/ Dress Design/ Garment Manufacturing/ Fashion Technology/ Fashion Designing from any recognized Institute with two years Supervisory/ practical/ teaching experience in the concerned trade.
OR
Full time Diploma in Apparel/ Dress Design/ Fashion Designing/ Garment Manufacturing/ Fashion Technology from any recognized Institute with three year Supervisory or practical or teaching experience in the concerned trade.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 year.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.4000/-
ADVERTISEMENT NO.6/2018
15. TURNER INSTRUCTOR (PRACTICAL)
No. of Vacancies: 52 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Turner with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Turner passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
16. FITTER INSTRUCTOR (PRACTICAL)
No. of Vacancies: 85 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Fitter with Crafts Instructor Training course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Fitter passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
17. WELDER (GAS AND ELECTRIC) INSTRUCTOR (PRACTICAL)
No. of Vacancies: 62 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Welding/ Fabrication (CoE) with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Welding passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Experience: Five years practical/ teaching experience including training period.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
18. CRAFT STENOGRAPHY HINDI INSTRUCTOR (PRACTICAL)
No. of Vacancies: 16 Nos.
Educational Qualification: i) Full time Bachelor degree with minimum 60% marks in Hindi subject, from a recognized University.
ii) National Trade Certificate/ National Apprenticeship Certificate in Shorthand Hindi trade passed with minimum 70% marks and CITC in Steno Hindi;
iii) Shorthand at a speed of 80 WPM and 15 WPM Transcriptions thereof and 30 WPM in typing in Hindi.
iv) ‘O’ level certificate in Computer from Department of Electronics and Information Technology (DOEACC) or its equivalent course from Haryana State Board of Technical Education/ recognized University.
v) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
19. CRAFT STENOGRAPHY ENGLISH INSTRUCTOR (PRACTICAL)
No. of Vacancies: 19 Nos.
Educational Qualification: i) Bachelor degree with minimum 60% marks in English subject from a recognized University.
ii) National Trade Certificate/ National Apprenticeship Certificate with minimum 70% marks with CITC in Steno (English).
iii) Shorthand at a speed of 100 WPM and 15 WPM transcription thereof and 40 WPM typing in English.
iv) ‘O’ level certificate in Computer from Department of Electronics and Information Technology (DOEACC) or its equivalent from Haryana State Board of Technical Education/ recognized University.
v) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
20. HEALTH SANITARY INSTRUCTOR (PRACTICAL)
No. of Vacancies: 05 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Health Sanitary Inspector.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Experience: Five years practical/ teaching experience in concerned trade.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
21. DESK TOP PUBLISHER OPERATOR INSTRUCTOR (PRACTICAL)
No. of Vacancies: 01 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Desktop publisher operator with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Desktop publisher operator passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training
period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
22. SURVEYOR INSTRUCTOR (PRACTICAL)
No. of Vacancies: 02 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Surveyor with Crafts Instructor Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Surveyor passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
23. MECHANIC REFRIGERATION & AIR-CONDITIONING INSTRUCTOR (PRACTICAL)
No. of Vacancies: 42 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Refrigeration & Air Conditioning with Crafts Instructor Training course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Mechanic Refrigeration & Air Conditioning passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including
training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
24. ELECTRICIAN INSTRUCTOR (PRACTICAL)
No. of Vacancies: 94 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Electrician with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship certificate in Electrician passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
25. MECHANIC ELECTRONICS INSTRUCTOR (PRACTICAL)
No. of Vacancies: 26 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Electronics with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Electronics passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
26. INTERIOR DECORATION AND DESIGNING INSTRUCTOR (PRACTICAL)
No. of Vacancies: 03 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Interior Decoration and Designing with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Interior Decoration and Designing passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
27. MECHANIC CONSUMER ELECTRONICS INSTRUCTOR (PRACTICAL)
No. of Vacancies: 06 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Consumer Electronics with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Mechanic Consumer Electronics/ Electronics passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
28. MECHANIC MACHINE TOOL MAINTENANCE INSTRUCTOR (PRACTICAL)
No. of Vacancies: 03 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Machine Tool Maintenance with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Mechanic Machine Tool Maintenance passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
29. SHEET METAL WORKER INSTRUCTOR (PRACTICAL)
No. of Vacancies: 08 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Sheet Metal with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship certificate in Sheet Metal passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
30. WIREMAN INSTRUCTOR (PRACTICAL)
No. of Vacancies: 34 Nos.
Educational Qualification: i) National Trade certificate/ National Apprenticeship Certificate in Wireman with crafts Instructor Training course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Wireman passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
31. MILLWRIGHT MECHANIC (MECHANICAL) INSTRUCTOR (PRACTICAL)
No. of Vacancies: 30 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Millwright Mechanic/Mechanic Machine Tool Maintenance with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship certificate in Millwright Mechanic/ Mechanic Machine Tool Maintenance passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
32. MILL WRIGHT MECHANIC (ELECTRICAL/ ELECTRONICS) INSTRUCTOR (PRACTICAL)
No. of Vacancies: 13 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Electrician/ Electronics/ Instrument Mechanic with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Electrician/ Electronics/Instrument Mechanic passed with minimum 70% marks and NCVT approved POT course, with 05 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
33. PAINTER (GENERAL) INSTRUCTOR (PRACTICAL)
No. of Vacancies: 20 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Painter (General) with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Painter (General) passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
34. PLASTIC PROCESSING OPERATOR INSTRUCTOR (PRACTICAL)
No. of Vacancies: 03 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Plastic Processing Operator with Crafts Instructor Training course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Plastic Processing Operator passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
35. FOUNDRY MAN (MOULDER) INSTRUCTOR (PRACTICAL)
No. of Vacancies: 01 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Foundry Man with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Foundry Man passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
36. PLUMBER INSTRUCTOR (PRACTICAL)
No. of Vacancies: 32 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Plumber with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period;
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Plumber passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
37. INSTRUMENT MECHANIC INSTRUCTOR (PRACTICAL)
No. of Vacancies: 05 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Instrument Mechanic with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Instrument Mechanic passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
38. MECHANIC AGRICULTURE MACHINERY INSTRUCTOR (PRACTICAL)
No. of Vacancies: 03 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Agriculture Machinery with Crafts Instructor Training course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Tractor Mechanic/ Farm Mechanic and Agriculture Mechanic Machinery passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
39. ARCHITECTURAL ASSISTANT (PRACTICAL)
No. of Vacancies: 03 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Architectural Assistant with Crafts Instructor Training course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Architectural Assistant passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
34. INFORMATION TECHNOLOGY AND ELECTRONICS SYSTEM MAINTENANCE INSTRUCTOR (PRACTICAL)
No. of Vacancies: 01 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Information Technology and Electronics System Maintenance with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Information Technology and Electronics System Maintenance/ Electronics passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
41. MECHANIC COMPUTER HARDWARE INSTRUCTOR (PRACTICAL)
No. of Vacancies: 07 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Computer Hardware with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship certificate in Mechanic Computer Hardware/ Electronics passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
42. TRACTOR MECHANIC INSTRUCTOR (PRACTICAL)
No. of Vacancies: 13 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Tractor Mechanic with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Tractor Mechanic/ Farm Mechanic and Agriculture Mechanic Machinery passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
43. MACHINIST INSTRUCTOR (PRACTICAL)
No. of Vacancies: 35 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Machinist with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade isnot available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Machinist passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
44. CARPENTER INSTRUCTOR (PRACTICAL)
No. of Vacancies: 31 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Carpenter with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Carpenter passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
45. MECHANIC DIESEL INSTRUCTOR (PRACTICAL)
No. of Vacancies: 23 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Diesel with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Mechanic Diesel/ Mechanic Motor Vehicle passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
46. MECHANIC MOTOR VEHICLE INSTRUCTOR (PRACTICAL)
No. of Vacancies: 27 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Motor Vehicle with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Mechanic Motor Vehicle passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
47. MACHINIST GRINDER INSTRUCTOR (PRACTICAL)
No. of Vacancies: 03 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Machinist (Grinder) with Crafts Instructor Training Course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Machinist (Grinder) passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
48. TOOL & DIE MAKER (DIES & MOULDS) INSTRUCTOR (PRACTICAL)
No. of Vacancies: 04 Nos.
Educational Qualification: i) National Trade certificate/ National Apprenticeship Certificate in Tool and Dies Maker (Dies and Moulds) with crafts instructor Training course (CITC) in relevant trade with 05 years practical/ teaching experience including training period.
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Tool and Dies Maker passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
49. DRAUGHTSMAN (CIVIL) INSTRUCTOR (PRACTICAL)
No. of Vacancies: 44 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Draughtsman Civil with Crafts Instructor Training course (CITC) in relevant trade with 05 years practical/ teaching experience including training period
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Draughtsman Civil passed with minimum 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
50. DRAUGHTSMAN (MECHANICAL) INSTRUCTOR (PRACTICAL)
No. of Vacancies: 26 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate in Draughtsman(Mechanical) with Crafts Instructor Training course (CITC) in relevant trade with 05 years practical/ teaching experience including training period
In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/ National Apprenticeship Certificate in Draughtsman (Mechanical) passed with 70% marks and NCVT approved POT course, with 08 years practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.9300-34800/- with Grade Pay Rs.3600/-
51. CRAFT INSTRUCTOR (WOMEN) FASHION TECHNOLOGY (PRACTICAL)
No. of Vacancies: 03 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teacher Training Course (TTC) in Fashion Technology with 05 year practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
52. CRAFT INSTRUCTOR (WOMEN) CUTTING & SEWING (PRACTICAL)
No. of Vacancies: 20 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teacher Training Course (TTC) in Cutting & Sewing/ Dress Making/ Fashion Technology with 05 year practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
53. CRAFT INSTRUCTOR (WOMEN) HAIR & SKIN CARE (PRACTICAL)
No. of Vacancies: 18 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teaching Training Course (TTC) in Hair & Skin Care with 05 year practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
54. CRAFT INSTRUCTOR (WOMEN) DRESS MAKING (PRACTICAL)
No. of Vacancies: 20 Nos.
Educational Qualification: i) National Trade Certificate/ National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teaching Training Course (TTC) in Dress Making/ Two years Fashion Technology with 05 year practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
55. CRAFT INSTRUCTOR (WOMEN) EMBROIDERY & NEEDLE WORK (PRACTICAL)
No. of Vacancies: 05 Nos.
Educational Qualification: i) National Trade Certificate /National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teacher Training Course (TTC) in Embroidery and Needle work/ Two years Fashion Technology with 05 year practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
56. CRAFT INSTRUCTOR (WOMEN) COMPUTER AIDED EMBROIDERY (PRACTICAL)
No. of Vacancies: 13 Nos.
Educational Qualification: i) National Trade Certificate /National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teacher Training course (TTC) in Computer Aided Embroidery/ Embroidery with 05 year Practical/ teaching experience including training period.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.
Age Limit: Minimum 17 years and maximum 42 years.
Pay Scale: Rs.35400-112400/-
Upper Age Relaxation: Upper age limit is relaxable for SC/BC/Ex-Serviceman & Others, if any — As per Govt. norms.
Candidates’ Selection: Selection of candidates will be through Written Examination, Socio-Economic criteria and Experience.
Exact Date, Time and Venue for examination/interview will be intimated to the eligible candidates in due course as well as such information will be also available in the official website of Haryana Staff Selection Commission (HSSC) — www.hssc.gov.in
For more details regarding candidates’ selection norms and eligibility norms, go through the officially released advertisement (See URL/PDF below).
Application Fee: Candidates must pay Rs.150/- (Rs.75/- for General category Female candidates of Haryana, Rs.35/- for Male candidates of SC/BC categories of Haryana, Rs.18/- for Female candidates of SC/BC categories of Haryana) as Application Fee. Fee can be paid through Online mode during submission of online application form by Net banking OR can be paid through Bank by means of fee payment Challan. Fee Challan can be downloaded from the official website of Haryana Staff Selection Commission (HSSC). See released advertisement for more details.
NO APPLICATION FEE REQUIRED IN CASE OF EX-SERVICEMAN OF HARYANA CANDIDATES.
How to Apply: Interested and eligible candidates may apply online only through the official website of Haryana Staff Selection Commission (HSSC) — www.hssc.gov.in (See Application form’s link given below) from dated 12.01.2019 to 18.02.2019.
Upon successful payment of prescribed fee and submission of online application form, the system generated Registration/ Acknowledgement Slip with unique registration number will appear on the computer screen. Candidates must print-out it for future correspondence. DO NOT SEND ANY PRINT-OUT/HARD COPY OR DOCUMENTS TO ANYWHERE AT THIS STAGE. All the verification will be done in due course.
For detailed instruction on how to apply online, please go through the officially released advertisement (See below given link/ PDF file for more details)
Important Dates:
Starting Date of Online Application: 12.01.2019 and 19.01.2019 for Adv.06/2018 and 07/2018 respectively.
Closing Date of Online Application: 11.02.2019 and 18.02.2018 for Adv.06/2018 and 07/2018 respectively.
Above given information are in brief. Before applying Online please go through the officially released Advertisement
Official website of Haryana Staff Selection Commission (HSSC) — www.hssc.gov.in
For Advt., See following PDF file — (i) Adv.06/2018: [sc name=”seepdf” pdflink=”http://www.hssc.gov.in/writereaddata/Advertisements/75_1_1_Advt.%20No6.2018.pdf” ] and
(ii) Adv.07/2018: [sc name=”seepdf” pdflink=”http://www.hssc.gov.in/writereaddata/Advertisements/76_1_1_Advt.%20No%207.2018-converted.pdf” ]
To Apply Online now, visit the following URL — [sc name=”externallink” externallink=”http://recruitment-portal.in/HRSSC.html” ]
